Zum Inhalt springen
NetcupWiki

Partitioning of a VPS or Root Server

Learn how to partition your server with GParted or via the command line.

Check whether the instructions apply to your system. Errors when modifying the partitioning can lead to data loss. Be sure to create an up-to-date backup of your system before continuing. You can find out how to create a snapshot at: Snapshots

1. Partitioning with the GParted Live CD (recommended)

2. Partitioning via the Command Line

If you have no experience with the partitioning of servers, we recommend using the GParted Live CD. It allows partitioning via a graphical user interface.

Errors when modifying the partitioning can lead to data loss. Be sure to create an up-to-date backup of your system before continuing.

Getting Started

  1. Log in to the Server Control Panel (SCP).
  2. Go to Media > DVD drive.
  3. Start GParted.
  4. Make sure that you have selected the correct hard drive in the top right window.

Resizing the Partition

  1. You can now see all the partitions on the hard drive.
  2. Select the partition you want to resize from the list.
  3. Right-click and select Resize/Move.
  4. Modify the size either with the slider or enter the desired value manually.
  5. Confirm the changes by clicking Resize/Move.
  6. Click the green checkmark at the top to apply your changes.

Creating a New Partition

  1. Make sure that you either have unallocated space on your hard drive or that you shrink an existing partition to free up space.
  2. Right-click the entry with the free space and select New.
  3. Adjust size if necessary.
  4. Confirm by clicking the Add button.
  5. Click the green checkmark at the top to apply your changes.

A new partition must later be mounted in the operating system. Only then you can access the partition.

2. Partitioning via the Command Line

Check whether the instructions apply to your system. Errors when modifying the partitioning can lead to data loss. Be sure to create an up-to-date backup of your system before continuing.

Getting Started

These steps are necessary to determine whether FDSIK or GDSIK must be used in the following process.

  1. Enter the command fdisk -l to determine the partition table that is currently in use.

  2. As a result, you will receive one of the following responses:

or

  • If your disk label type is “dos”, go to: Partitioning with FDISK and MBR Partition Table

  • If your disk label type is “gpt”, go to: Partitioning with GDISK and GPT Partition Table

Partitioning with FDISK and MBR Partition Table

Check whether the instructions apply to your system. Errors when modifying the partitioning can lead to data loss. Be sure to create an up-to-date backup of your system before continuing.

Finding the Device

  1. Verify the name of the hard drive in use. Enter the following commands:

ls -la /dev/vda

and/or

ls -la /dev/sda

  1. An error message appears for one of the two commands stating that the file was not found. Your hard drive is therefore called “vda” or “sda”.
  2. Throughout the rest of the article, the hard drive will be referred to as “Xda”. Replace the “X” with the name of your hard drive:

„s“ for /dev/sda

or

„v“ for /dev/vda.

  1. Throughout the rest of the article, the partition will be referred to as “0”. Replace “0” with the corresponding partition number you want to modify.

Existing Partitions

Enter the command df -h to display information about hard drive usage and file systems:

root@v123:~# df -h


Filesystem            Size  Used Avail Use% Mounted on


/dev/mapper/volume-root


                       39G  707M   36G   2% /


tmpfs                 7.9G     0  7.9G   0% /lib/init/rw


udev                  7.9G  116K  7.9G   1% /dev


tmpfs                 7.9G     0  7.9G   0% /dev/shm


/dev/Xda1             248M   26M  210M  11% /boot

Use the command fdisk -l to retrieve information about the available disk space:

root@v123:~# fdisk -l






Disk /dev/Xda: 251.3 GB, 251255586816 bytes


[...]






   Device Boot      Start         End      Blocks   Id  System


/dev/Xda1   *           3         523      262144   83  Linux


Partition 1 does not end on cylinder boundary.


/dev/Xda2             523       83221    41679872   8e  Linux LVM


Partition 2 does not end on cylinder boundary.






Disk /dev/dm-0: 42.2 GB, 42165338112 bytes


[...]

Partitioning

Rescue System

To modify the partitioning of the hard drive, you must boot the system in the rescue system:

  1. Change the boot order of the KVM server so that it boots from the network first. You can adjust these settings in the SCP under Settings > Boot order.
  2. Activate the rescue system under Media > Rescue system and follow the instructions to restart the system.
  3. Connect to the rescue system using the temporary password displayed.
Increasing Partition Size

  1. Start fdisk.

  2. Answer the setup as follows: [u], [c], [d], [0], [n], [p], [0], [Enter], [Enter], [w]

Replace “0” with the desired partition number.

Only set the DOS compatibility mode if it is absolutely necessary. Otherwise, the assignment of the sectors is no longer correct.

root@v123:~# fdisk /dev/Xda


WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
 switch off the mode (command 'c') and change display units to
 sectors (command 'u').


Command (m for help): u
Changing display/entry units to sectors


Command (m for help): c
DOS Compatibility flag is not set


Command (m for help): d
Partition number (1-4): 0


Command (m for help): n
Command action
 e extended
 p primary partition (1-4)
p
Partition number (1-4): 0
First sector (526336-490733567, default 526336):
Using default value 526336
Last sector, +sectors or +size{K,M,G} (526336-490733567, default 490733567):
Using default value 490733567


Command (m for help): w
The partition table has been altered!


Calling ioctl() to re-read partition table.
Syncing disks.

3. Use the command fsck -C0 -y -f /dev/Xda0 to check the file system for errors and repair it if necessary (replace “Xda0” with the hard disk name and the partition number):

root@v123:~# fsck -C0 -y -f /dev/Xda0


[...]


/dev/Xda2: 53498/1242480 Dateien (0.1% nicht zusammenhängend), 313172/5065216 Blöcke
root@v123:~# resize2fs -p /dev/Xda2
resize2fs 1.41.12 (17-May-2010)
Die Grösse des Dateisystems auf /dev/Xda2 wird auf 30641664 (4k) Blöcke geändert.


Start von Durchgang 1 (max = 781)
Vergrößere die Inode-TabelleXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Das Dateisystem auf /dev/Xda2 ist nun 30641664 Blöcke groß.

Final Steps

  1. Restart the system and connect to the productive system.

  2. Enter the command df -h again. The output of the available space should now look like this:

root@v123:~# df -h
Filesystem      Size  Used Avail Use% Mounted on


/dev/Xda2       117G  2.6G  109G   3% /


udev            2.0G  4.0K  2.0G   1% /dev


tmpfs           791M  240K  791M   1% /run


none            5.0M     0  5.0M   0% /run/lock


none            2.0G     0  2.0G   0% /run/shm


/dev/Xda1       112M   32M   75M  30% /boot

Partitioning with GDISK and GPT Partition Table

GPT has the advantage that you can manage partitions with capacity of more than 2 TB.

Check whether the instructions apply to your system. Errors when modifying the partitioning can lead to data loss. Be sure to create an up-to-date backup of your system before continuing.

Finding the Device

  1. Verify the name of the hard drive in use. Enter the following commands:

ls -la /dev/vda

and/or

ls -la /dev/sda

  1. An error message appears for one of the two commands stating that the file was not found. Your hard drive is therefore called “vda” or “sda”.
  2. Throughout the rest of the article, the hard drive will be referred to as “Xda”. Replace the “X” with the name of your hard drive:

„s“ for /dev/sda

or

„v“ for /dev/vda.

  1. Throughout the rest of the article, the partition will be referred to as “0”. Replace “0” with the corresponding partition number you want to modify.

Existing Partitions

Enter the command df -h to display information about hard drive usage and file systems:

Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf


/dev/Xda3       5,3G    1,2G  3,9G   23% /


udev             10M       0   10M    0% /dev


tmpfs           1,2G    8,4M  1,2G    1% /run


tmpfs           3,0G       0  3,0G    0% /dev/shm


tmpfs           5,0M       0  5,0M    0% /run/lock


tmpfs           3,0G       0  3,0G    0% /sys/fs/cgroup

Use the command fdisk -l to retrieve information about the available disk space:

Disk /dev/Xda: 117 GiB, 125627793408 bytes, 245366784 sectors


Units: sectors of 1 * 512 = 512 bytes


Sector size (logical/physical): 512 bytes / 512 bytes


I/O size (minimum/optimal): 512 bytes / 512 bytes


Disklabel type: gpt


Disk identifier: 2AE9B363-C537-4A7A-814E-E2ADBB5FA4BC






Device        Start       End   Sectors   Size Type


/dev/Xda1        34     19531     19498   9,5M BIOS boot


/dev/Xda2     19584   8006783   7987200   3,8G Linux swap


/dev/Xda3   8006784  19530879  11524096   5,5G Linux filesystem


/dev/Xda4  19530880 245366719 225835840 107,7G Microsoft basic data

Partitioning

Rescue System

To modify the partitioning of the hard drive, you must boot the system in the rescue system:

  1. Change the boot order of the KVM server so that it boots from the network first. You can adjust these settings in the SCP under Settings > Boot order.
  2. Activate the rescue system under Media > Rescue system and follow the instructions to restart the system.
  3. Connect to the rescue system using the temporary password displayed.
Increasing Partition Size

  1. Start GDISK using the command gdisk /dev/Xda.

  2. Confirm all entries from GDISK with .

  3. Press the

    key to list the existing partitions.

Disk /dev/Xda: 245366784 sectors, 117.0 GiB
Logical sector size: 512 bytes


Disk identifier (GUID): 2AE9B363-C537-4A7A-814E-E2ADBB5FA4BC


Partition table holds up to 128 entries


First usable sector is 34, last usable sector is 245366750


Partitions will be aligned on 2-sector boundaries


Total free space is 83 sectors (41.5 KiB)






Number  Start (sector)    End (sector)  Size       Code  Name


   1              34           19531   9.5 MiB     EF02  primary


   2           19584         8006783   3.8 GiB     8200  primary


   3         8006784        19530879   5.5 GiB     8300  primary


   4        19530880       245366719   107.7 GiB   0700  primary

During the installation of one of our pre-configured images, a separate partition is created for the disk space not used by the operating system. In this example, it is partition number 4. However, the partition number may vary with other images.

  • Delete partition number 4 (= unused space in this example).

    Command (? for help): d Partition number (1-4): 4

  • Delete the partition you want to increase:

    Command (? for help): d Partition number (1-3): 3

  • Create partition 3 with the new size:

    Command (? for help): n Partition number (3-128, default 3):

Input: 

First sector (19532-245366750, default = 8006784) or {+-}size{KMGTP}:

Input: 

Last sector (8006884-245366750, default = 245366750) or {+-}size{KMGTP}:

Input: +50G

The partition will therefore be 50 GB in size. Alternatively, you can select the suggested default values to partition the entire hard drive capacity. If you confirm with , the entire capacity (in this case 8300) will be used. If you want to determine the size yourself, enter the desired numerical value.

Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300):

Input: 

Changed type of partition to 'Linux filesystem'

  • Press the

    key again to display the newly partitioned area:

    Disk /dev/Xda: 245366784 sectors, 117.0 GiB

    Logical sector size: 512 bytes

    Disk identifier (GUID): 2AE9B363-C537-4A7A-814E-E2ADBB5FA4BC

    Partition table holds up to 128 entries

    First usable sector is 34, last usable sector is 245366750

    Partitions will be aligned on 2-sector boundaries

    Total free space is 152 sectors (76.0 KiB)

    Number Start (sector) End (sector) Size Code Name

    1 34 19531 9.5 MiB EF02 primary

    2 19584 8006783 3.8 GiB 8200 primary

    3 8006884 245366750 50 GiB 8300 Linux filesystem

  • Press the key to write the changes to the partition table:

    Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!! Do you want to proceed? (Y/N):

Input: y

Final Steps

  1. Adjust the file system:

resize2fs /dev/Xda3 <ENTER>

  1. Enter the command df -h again to display the successful increase of /dev/xda3.
Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf
/dev/Xda3        50G    1,2G   46G    3% /


udev             10M       0   10M    0% /dev


tmpfs           1,2G    8,4M  1,2G    1% /run


tmpfs           3,0G       0  3,0G    0% /dev/shm


tmpfs           5,0M       0  5,0M    0% /run/lock


tmpfs           3,0G       0  3,0G    0% /sys/fs/cgroup

Last update: 29 July 2026